We use Cookies to improve your website experience. Learn about our cookie policy.


Skip to Content
Main Content

Flex-Lag® Full Ceramic Lagging

Flex-Lag® Full Ceramic Lagging

Flex-Lag® Full Ceramic Lagging is the reliable solution for belt slippage problems that conventional rubber lagging often can’t correct. In fact, with 80% tile coverage, it features the highest coefficient of friction available in lagging materials – two to three times the friction of rubber in wet, muddy, or dry conditions. 

Features and Benefits

  • 80% tile coverage
  • Ceramic tiles increase coefficient of friction between the belt and drive pulley in wet or variable conditions
  • Constructed from hundreds of individual ceramic tiles molded into a durablerubber backing with a higher coverage than Medium Ceramic for best-in-class abrasion resistance
  • Molded ceramic buttons grip the belt's underside for positive traction
  • Best for high-tension belts
  • Available with FRAS approved rubber, marked in blue for easy identification on site
  • Smooth ceramic available on demand


  • Minimum Pulley Diameter: 12" (300 mm) 
  • Thickness: .5 - 1.15" (12 - 30 mm)
  • Temperature Rating: 5° F to 185° F (-15° C to 85° C)
  • Rubber Compound: SBR (Styrene-Butadiene-Rubber)
  • Rubber Hardness: 68 ± 3 Shore A
  • FRAS (Fire Resistant Anti Static) - MHSA Certification # MSHA NO. IC-190
  • Ceramic Compound: Aluminum Oxide (Al203)
  • Ceramic Hardness: 83 HRA Rockwell Hardness Scale A
  • Strip widths from 35" (880 mm) to 101" (2560 mm) to match pulley face widths
  • Strip widths from 18" (450 mm) to 84" (2100 mm) to match belt widths


  • Use the Flexco Lagging calculator to determine the appropriate number of strips/rolls required for your application
  • Flex-Lag does not require removing the pulley from the conveyor system
  • A labor-saving cold vulcanization process with Flex-Lag Adhesive makes on-site installation fast, simple, and efficient
  • Products
  • Specifications
  • Instructions
  • Sales Support
Apply FiltersClose
Refine Results
Please wait while we gather your results.



Flex-Lag® Ceramic
Full Ceramic
Total Thickness*
(12.7 mm)
Belt Width*
(450–2100 mm)
Minimum Pulley Diameter
12" (300 mm)
Dry Friction
Wet Friction
Wet/Muddy Friction
Very Good
Wear Life
Ease of Installation
Drainage Grooves
FRAS (Fire Resistant Anti Static)
Rubber Compound
Hardness (Shore A)
68 +/- 3
Ceramic Compound
Al2 O3
Ceramic Coverage
Operating Temperature
5° – 185° F (-15° – 85° C)

*Additional thicknesses and widths available as special orders. 

We use cookies to give you the best possible experience with our website. If you continue without changing your settings, you are agreeing to our use of cookies to improve your user experience. You can click the cookie settings link on our website to change your cookie settings at any time.
Privacy Policy