Segmented Transfer Plate Ordering Specifications
-
Specify belt width. Mounting bar is 2" longer than specified belt width.
-
Determine transfer size required.
-
Determine mounting bar location and if offset is required.
For horizontal to horizontal belt applications.
Measure distance between pulleys at a point 0.5" to 1.5" below the tops of the pulleys (including belt thickness).
For waterfall applications.
Measure distance from about 45° from the top of the upper pulley to the top point on the lower pulley.
For belt to chute or slide applications.
On pulley side, position no higher than 1/2" below the crown with bridge segment positioned roughly 1/8" to 1/2" above the top of the chute or slide back wall.